Error Code | Meaning | Troubleshooting |
E0 or F0 | Power Interruption or Door Ajar | Make sure the door is fully closed. If the error was caused by a power outage, it will clear once power is restored and the door is shut. |
E1 or F1 | Faulty Fridge Temperature Sensor | Unplug the unit for one minute to reset the sensor. If the error remains, consider replacing the sensor. |
E2 or F2 | Freezer Sensor or Evaporator Fan Issue | Check the evaporator fan for blockages or damage. Defrost the unit if necessary and confirm the fan is functioning. |
E3 or F3 | Defrost Sensor or Condenser Fan Fault | Inspect the condenser fan for ice or malfunction. Defrost and repair or replace the fan if needed. |
E4 or F4 | Fridge Defrost System Error | Examine the defrost system’s timer, heater, and thermostat. Replace any malfunctioning parts to restore function. |
E5 or F5 | Freezer Defrost or Ice Maker Malfunction | Inspect the ice maker and defrost system for faults. Replace or repair components as needed. |
E6 or F6 | Internal Communication Error | Restart the fridge to reset communications. Examine wiring and connections for visible damage. |
E7 or F7 | Ambient Temperature Sensor Fault | Environmental conditions may be affecting the fridge. Adjust surroundings and verify internal temperature settings. |
E8 or F8 | General System Failure | May involve compressor or refrigerant issues. Professional diagnosis is recommended. |
E9 or F9 | High Freezer Temperature Alert | Confirm the freezer door is fully closed. Check the door sensor and replace it if necessary. |
PO | Power Outage Detected | Reset the refrigerator. Error will clear once stable power is restored. |
PE | Electrical Supply Error | Inspect the power cord and wall outlet. Repair or replace any damaged components. |
PC | Pantry Drawer Sensor Fault | Use a multimeter to test the pantry drawer sensor. Replace it if found to be faulty. |
HRS | High Temperature in Refrigerator | Look for cooling issues or compromised door seals. Replace any damaged seals. |
LRS | Low Temperature in Refrigerator | Modify temperature settings to maintain optimal fridge conditions. |
SY or CE | Interface and Control Board Communication Fault | Check connections between the control board and user interface. Replace if reconnection fails. |
LC | Leak Detection Error | Look for visible leaks around or inside the refrigerator. Address the source of any leaks found. |
rd | Defrost Heater Malfunction | Examine the defrost heater for damage and replace it if defective. |
DF | Defrost System Failure | Inspect the defrost timer, heater, and thermostat. Replace faulty components to restore defrost operation. |